Semi auto bottle brushing & rinsing/washing machine

Semi auto bottle brushing & washing machine

Description:

 Manual brushing & rinsing machine is a GMP stainless steel model consists of three different units as follows

1.    Brushing unit: Available in 2 or 4 heads. Have SS covered body and robust construction. Rotating Chucks are provided to hold the brushes of suitable size for brushing the bottles. This unit is used for brushing inner/outer surface of bottle and clean the dust deposited.

2.   Rinsing unit: each unit is made out of Stainless Steel grade AISI304, consists of 12nos (or more) of SS rinsers/jets . Ball valve is provided for controlling flow of water. Leak proof construction. Whole unit is constructed over a drainage tray to avoid spillage of water out of tank. Rubber corks are provided over rinsing tray to avoid chipping of bottles. After brushing the bottles are placed in bottoms up position on these jets, the strong multi jet flow of water cleans the scrubbed dust and waste from inner bottle surface. Water pump can be provided with piping & fittings for complete solutions.

3.   SS tank with sink: Brushing and rinsing units are fitted on the SS tank. Waste water is stored or can be drained out by using sink. Partition can be provided for soap water/ fresh/used water or hot water. Finally bottles are washed in desired water.

Specifications:

• Motor Drive: 0.5HP, single phase.
• Output: 10-20 bottles with 2head, 12 jets

Sink tank can be modified as per your requirement at extra cost:

• Standard tank as shown above
• Tank with multiple partition to accommodate different type of water

Variants:

• 2 Head brushing unit with 1Unit (12jet) rinser  with sink tank
• 4 head brushing unit with 2Unit (12jet) rinser  with sink tank

* Rinser jet depends on the Diameter of the bottle

Optional  Item:

1. Stainless steel water pump 1hp/230V with in-out connection

2. Single Cartridge filter with 10 micron cartridge (3/4bsp inlet), extra cartridge @300 each