Pages

Thursday, October 24, 2019

SEMI AUTOMATIC ROTARY TUBE FILLING AND SEALING MACHINE (for Plastic & Lami Tubes)


Production speed: Up to 30-40 tubes /min...Depends upon the viscosity of the filling material, and the fill volume. 
Filling Range : 10-30 ml or more depending on the requirement
Tube dia : 10 – 50mm (Min – Max)


BASIC MACHINE FEATURES:

Supplied Complete with the following, and is set to Fill/Seal any one-tube size
  • Manual in feed of empty tubes excluding guarding.
  • One set of Tube holder, for any One-tube size with grippers with springs to hold the tubes properly. 40 liters single wall stainless steel hopper made of S.S 304 material.
  • The No tube - No fill device. Prevents the dosing action if tube is not present. With a sensor and pneumatic system, to operate only when the tube is there for filling, otherwise the turret will move to the next station.
  • Ointment / Cream dosing Pump head. A piston-dosing pump, consisting of Teflon piston placed in S.S. cylinder carries out the dosing. One set of piston and cylinder can fill the following range.
    10 – 30gms. / 30 – 100gms / 100-250gms (Depending on material characteristic)
  • Filling nozzle consisting of a Positive shut off system, helps eliminates product dripping / stringing, and maintains filling accuracy. (All contact parts are in food-graded material)
  • Hot Air blowing station for melting Plastic-Laminated tubes. Hot Air is blown through a hot-air tool, on to the sealing area of the tube. When the tube is lifted for heating, a cooling block (Chilled water is circulated through it) to have a dent free seal.
  • Tube Sealing and coding unit, which seals the heated part of the tube and then codes on the seal with metal female type stereos,
  • Trimming unit, to trim the end portion of the tube, and to maintain tube length
  • S.S covers guard all parts below main functioning area of the machine
  • Electrical system consists of a trouble-free electrical panel, along with operating panel board.
  • Drive unit consist of 1 HP, 40 RPM 3-phase geared-motor fitted with sprocket for a fix speed. The device is having Geneva mechanism.
  • Automatic ejection / discharge of tube. (Tail first)

DESCRIPTION:

  1. 8 station model
  2. With 30ltr. Capacity plain Hopper
  3. 10-30ml syringe pump. or any one size of ur choice
  4. One set of tube holder for any one tube size dia.
  5. Specially designed Pneumatic shut off nozzle system for control of tailing for any one size tube
  6. Ac drive for operating the machine at variable speed
  7. all component used are of good quality & branded make, list can be provided on request
  8. tube shall be placed manually & oriented manually
  9. rest all operation automatic
  10. leister (swiss )make hot air gun