Filter Press 18x15 Heavy Duty Model

 

Specification:

·       Operating pressure : 3.0 kg / cm2

·       Design pressure : 3.5 kg / cm2 Hydro test pressure : 4.0 kg cm2

·       M.O.C : all contact part in SS316 & non-contact part SS 304

·       Filtering Area : 2.40 Square Mtrs.

·       Cake Holding Capacity : 80 Ltrs

·       Output Ltr/Hrs : 5500 Ltrs/Hour (In Water Basis)

·       Shell & top thik : 2.5mm

·       Shell & top thik : 2.5mm

·       Bottom thik : 3 mm

·       Plates details : 1.6mm thik, height 38mm, Dia 18”(one piece plate)

·       Thickness Of Sieves : 1.6mm, no of 16

·       Said tie Rods : 6 Nos., 5/8 C

·       Centre Tie Rod : 1 No., 5/8 0

·       Centre inters locking Cup : 15 No.

·       Scavenger Plate : 15 mm Thick

·       Out said bolt : no of 12, 5/8

·       Pressure Gauge : ¼” B.S.P.

·       Air Vent : 3/8” B.S.P.

·       Gasket : Silicon

·       Trolley : S/S pipe SS 304 frame 32” X 34” with PU castor wheel

·       Finish : Polished To Mirror Finish Gear Pump For Above Unit

·       Type of Pump : GEAR Type

·       M.O.C. : all contact part in SS316 & pump housing CI Casting

·       Size of Pump : 1 ½”

·       Pump head : 50’ transfer only

·       Type of Shaft Seal : OIL SEAL

·       Motor : 3hp 1440 RPM3 phase NON FLP HIDUSTAN MAKE

·       Supply : 415 V Ac 3 Phase/50Hz.

·       Motor & Pump Guard : SS 304 18g

·       Motor & Pump Coupling : R 95 lovjoy

·    Dimension (L.x W. x H.) : 40” x 50” x 60

 

Filter Press 14x 10 Zero Hold Up Model

 

Description:

Filter press 8*6 model has 8 inch diameter and 6 plates which is used for filtering liquids. An industrial filter press is a tool used in separation processes, specifically to separate solid particles from the liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered particles , and allows easy cleaning or replacement of the filter media. This model can give 700-100  liter per hour output depending on the product viscosity and can filter any size of micron depending on client requirement.

Features:

1. ·       With gear pump/ centrifugal transfer pump to suit liquid  type

   ·       Machine  and contact parts are in stainless steel 304

   ·       Safety valve and pressure gauge is provided to ensure safe operation.

   ·       PP filter paper which are washable and reusable.

   ·       Pump can also be used to just transfer the material

    

2. Specifications:

•         Model-                                        1410
•         Plate Dia(inches)-                        14
•         No of plates-                                10
•         Filter Area ((M²)  -                      1.001
•         Cake holding capacity in liters-   25
•         Output Per Hr-                           700-100 liters
•          Pump-                                         2HP

Double Cone Blender

 

Description:

Double Cone Blender is an efficient for mixing dry powder and granulates homogeneously. All the contact parts are made   of stainless steel. Two-thirds of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

Double cone blender contact parts come ins SS304 and SS316 can be given on request. It can do from 10-500 liters or more depending on the requirement.

The capacity of the conical blender varies according to the size of your application.

We can make customized machine according to your requirement.

8x6 Filter Press heavy Duty Model

 

 Description:

Filter press 8*6 model has 8 inch diameter and 6 plates which is used for filtering liquids. An industrial filter press is a tool used in separation processes, specifically to separate solid particles from the liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered particles , and allows easy cleaning or replacement of the filter media. 

The Filter Unit required for clear filtration of liquid, Chemicals, Pharmaceuticals, Oils, Inks, beverages, food, cosmetics, paints, dye intermediates etc. The Filtration unit consists of a strong tank with SS top cover & tightening bolts. The filtering assembly fitted in the center of the tanks. Filtering plates, perforated screens, filter media, interlocking cups. The top cover fits on a gasket provided in the groove with the help of tightening ring nuts. The pressure gauge & air vent valve are also fitted on the top cover. 

TECHNICAL DETAILS:

• M.O.C : all contact part SS 304 & non contact part SS 304
• Filtering Area : 0.217m Square Mtrs.
• Cake Holding Capacity          : 4.9Ltrs
• Output Ltr/Hrs            : 500 Ltrs/Hour (In Water Basis)
• Shell thik        : 2mm
• Bottom thik     : 2.5mm
• Plates details  : 1.2mm thik, height 25mm, Dia 8” (one piece plate)
• Thickness Of Sieves   : 1.2mm, no of 7
• Centre Tie Rod           : 1 No., 3/8 ”
• Centre inters locking Cup      : 6 No.
• Scavenger Plate          : 10 mm Thick
• Inlet & outlet conation           : 19 mm nozzle
• Pressure Gauge           : 1/8”B.S.P.
• Air Vent          : ¼ B.S.P.
• Gasket : Silicon food grade
• Trolley            : 24” x 24”SS sheet 2.5 mm angel frame with P.U castor wheel

GEAR Pump For Above Unit

• Type of Pump :Trumark  GEAR pump
• M.O.C.            : SS 304 Quality
• Size of Pump  : ½”
• Pump head      : 25’ transfer only
• Type of Shaft Seal : OIL SEAL
• Motor : 1hp 1440 RPM 3 phase NON FLP Hindustan make
• Supply : 415 V Ac 3 Phase/50Hz.
• Motor & Pump Guard : SS 304 18g
• Motor & Pump Coupling       : L 75 lovjoy
• Dimension (L .x W. x H.)       : 24” x 24” x 30 »

Filter Press 8x6 Zero Hold Up Model

 Description:

Filter press 8*6 model has 8 inch diameter and 6 plates which is used for filtering liquids. An industrial filter press is a tool used in separation processes, specifically to separate solid particles from the liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered particles , and allows easy cleaning or replacement of the filter media. This model can give 300-500 liter per hour output depending on the product viscosity and can filter any size of micron depending on client requirement.

Features:

1. ·       With gear pump/ centrifugal transfer pump to suit liquid  type

   ·       Machine  and contact parts are in stainless steel 304

   ·       Safety valve and pressure gauge is provided to ensure safe operation.

   ·       PP filter paper which are washable and reusable.

   ·       Pump can also be used to just transfer the material

    

2. Specifications:

•         Model-                                          806
•         Plate Dia(inches)-                        8
•         No of plates-                                6
•         Filter Area ((M²)  -                      0.26
•         Cake holding capacity in liters-   4.6
•         Output Per Hr-                            300-500 liters
•          Pump-                                         1HP

INDUSTRIAL STIRRER /AGITATOR/ HOMOGENIZER

 

Description-

High speed Stirrer/ homogenizer  suitable for viscous creams liquids and all types of products. The machine is suitable for mixing all types of  products in batch size can do form 50-500 liters or more depending on requirement . Machine is with complete electric motor, coupling, stirring shaft with impeller having below specifications.

Specifications -

• Rpm               : 1440rpm / 2880 can be given on request.(can do variable with VFD drive at extra cost)
• Impeller         : saw cutter or anchor  type 1no or (more can be added a extra cost)
• MOC              : S.S. 304 or SS316 contact parts on request
• Shaft dia        : 19mm
• Shaft type      : HOLO SHAFT
• Shaft length   : according to service tank, not more than 1m

Optional- at extra cost

• Choice of blade and cage available

for high shear high pressure cage with holes  with cowl blade cost extra.

high shear, low pressure slotted cage with 4or 3 fan blade@extra

we can provide any design as per your request, cost can be given on request after u submit ur design

Hand lifting geared stand available  @  with max lifting upto 6 ft from ground.

STEAM SHRINK TUNNEL WITH STEAM GENERATOR

 

Features

• Steam label shrink machine is our new-developed shrink machine. It adopts steam as heat source, and has features of high speed, even heating, no wrinkle, adjustable power and perfect shrink effect.
• Machine body constructed in  S/S material, additionally heat-preservation layer is provided. This not only saves energy, but accords to international security standard.
• Whole machine adopts water-proof design, and S/S water receiver is mounted in the bottom in order to collect condensed water. It is easy to operate and maintain, and widely applied in the industry of mineral water, pure water, carbonated drink and tea etc.
• Machine adopts steam-shrink model with S/S structure. It has advantage of high efficiency in energy-consumption, simple operation and easy adjustment. Achieve perfect shrink effect with lowest power consumption.
• 5-section design in shrink tunnel, independent temp. control in each section, as well as height adjust and distance adjust between objects. Any shape bottle is able to reach nice-looking shrink effect after simple adjust.

 

Special feature:

• tunnel have gates to facilitate cleaning & to adjust the steam flushing nozzles
• gates are locked with food grade silicon seal to avoid any steam loss
• Multiple adjustable steam flushing nozzle to suit various shape & shrink ratio to get desired result by setting different steam pressure on different location on bottle

Steam Tunnel Specification:

model	TM-STT100		Capacity	5000~15000B/H
voltage	220V/50HZ		Steam Pressure	0.1Mpa
Power	150W		Steam Consumption	24Kg/H
Net Weight	150Kg		Shrink Temperature	75~85℃
tunnel size	1350*180*380mm		Dimension (L*W*H)	2400*430*1350mm

 

Steam Generator Unique Feature:

• Inbuilt water supply pump & storage tank
• heater starts only once jacketed tank is filled up to appropriate level to avoid damage to heaters
• can be run on 12kw for low steam needs or n 24Kw for high speed -high pressure application
• inbuilt buzzer, safety valve & auto on/off pressure switch & pressure guage

 

Steam generator Specification:

Power	12Kw  or 24Kw
Electricity	415V  ,  3PH
Pressure	0.4MPa
Tank storage Volume	27L
Steam production	16/32kg/Hour
Net Weight	91Kg approx

 

Electric Handy capper for Screw/plastic caps

Description-

Hand held capper is compact handy tool for capping screw cap on any bottle, comes with a custom made chuck made as per your cap sample with PU liner to avoid cap damage & scratches the chuck can be a change part for different size caps, the capping torque can be preset so the machine stop rotating the chuck after cap is tighten(set torque is reached) we can also give stand for machine or a top mounting spring balancer hanger for easy of working

 Features:

• Spees-900 RPM approx
• Torque-0.7-6.5Nm
• Weight- 0.8 kg

Hand Capping Machine For Milk Bottles

Description:

Low cost hand capping machine is suitable for small size lug caps below 43 mm which are mostly used for Glass milk bottles. capping is economic model and very easy to operate. This machine is not only used for lug caps but also for the screw caps of plastic bottles like juice bottle capping machine,water bottle capping machine etc.

You just have to place the cap ob the bottle and keep the machine chuck on the bottle head and press the button it will tighten the caps to the bottles.

Features:

• Spees-900 RPM approx
• Torque-0.7-6.5Nm
• Weight- 0.8 kg

 

Band Sealer with Vacuum & Gas Flushing System

Description:

This machine is based on the widely absorb essence of similar foreign products and vacuum machine .according to the latest requirement of market to design on new model with send, vacuum, inflatable (such as nitrogen or other gases), seal, code, in one set, continuous sealing and packing machine.

This machine with Simple and novel structure, beautiful appearance, complete function, high degree of automation, can greatly reduce the labor intensity of the operator.

Specification:

Model	LF1080B
Voltage	110/220V/50～60Hz
Function	Air Suction, Gas Flushing & Bag Sealing
Power	Motor power(50W) Fan（15W） Sealing Power:220Wx2 Vacuum pump:900W Total-W
Sealing speed (m/min）	0～12
Sealing Width（mm）	6～12
Temperature range	0～300
Max. thickness of single  layer film  (mm)	≤0.08
Max Loading of conveyor (Kg）	≤3
Machine size(L*W*H)mm	1020*480*(925+140 adjustable)
Weight (Kg)	84Kg

Thicker and wider heating block & cooling block to ensure the quick and perfect sealing

Hand Operated Labeling Machine TM50

 

DESCRIPTION:

Low cost labeling machine is a economy model suitable for round bottles labeling having sticker in roll form. The machine is suitable for all types of containers which are round in shape glass bottles, plastic bottles, tin, cans etc. The machine is very easy to operated you just need to keep the bottles on roller and rotate the handle it will apply label to the bottles.

FEATURES:

· Model: Hand operated economy model

· Operation: Manual W/O electricity

· MOC: Mild steel coated.

· Lable Length: -10-110mm

· Lable Width :10 to 300mm

· Bottle Dia: 15 to 120mm

· Bottle Hight Max: 150mm

· Speed: 8 to 10bpm

· picture shown in just for representative purpose actual machine may differ as per your requirement & feature selected

Manual Tin Sealing machine

 Description-

Hand operated tin can sealing machine is suitable for all kinds of round iron, plastic, the peel cans, tin cans, aluminum cans, paper, aluminum cover sealing, reliable quality, simple operation, is the ideal equipment of food and beverage industry. Machine is very simple to use you just need to rotate the handle and it will bring the tin holder up and the motors will do sealing on the can. Tin sealing machine is also called tin seamer

Specification-

• Capacity：12-20can/min
•  Application Range ： diameter of can：φ45-φ130mm 
• Height of can：39-200mm (More than this size need to be customized)
• Motor ：370w 
• Machine size ：L440×W390×H770 
• Packing size：490×420×800mm
• Net weight：26Kg 
• Gross weight：32KG 

Semi automatic ultrasonic tube sealer

 

DESCRIPTION -

Semi automatic tube sealing machine is specially designed for sealing plastic & laminated tube The ultrasonic waves are used for sealing tubes, this machine is suitable for sealing tubes for products like, face cream, face wash etc. This machine is mostly used in pharma, food and cosmetic industries. The machine has two process, sealing and trimming With Unilateral Coding, first the machine will seal the tube and then trim the extra part of it and coding is done after that.

SPECIFICATION-

• Power - 2~3 KW 
• Capacity - 10~12/min 
• Tube Size Dia - ≤ Φ 50mm Height ≤ 200mm 
• Power Supply - 220 KV 50Hz 
• Dimension - 560 X 537 X 880mm 
• Weight - 150 Kg
  
  
  
  

Low cost automatic weight based pouch packing machine 10-100gm

DESCRIPTION- 

Form-fill-seal (FFS) packaging machines form, fill and seal a package on the same machine. In such machines, the packaging material is fed off a roll, the pouches are formed product is filled , and sealing is done. The bags/packs are then filled, sealed and separated. Increased speed and versatility are the major advantages of FFS systems.

This machine are used for filling and sealing solid and dry products like granules, powder, snacks , namkeen  etc. 

SPECIFICATION-

• Model: WP-200B 
• Voltage: 220V 50Hz or 110V 60Hz
• Power: 360W
• Packing Weight: 2-50g/2-100g/2-200g
• Function: Filling(automatically weighing), Bag Forming, Bag Sealing
• Bag Type: Back sides sealed with notch on top and bottom end
• Bag Width: 2-10cm (custom)
• Bag Length: 2-17cm (adjustable)
• Roll Film Width: 6-22cm
• Packaging Film Materials: Paper/PE, PET/PE, PET/AL Plating/PE, BOPP/PE,Tea filter paper and  other heat sealing materials
• Packing Speed: 10-15 packs/Min
• Installation Dimension: 45*43*165cm
• Weight: 85KG

 

This packing machine is mainly used for packing powder and small granule items into sachet or small pouch. It is an automatic machine which including the functions of weighing, bag forming and filling and bag sealing.  It can pack items such as coffee, snacks, nuts, salt, flour powder, sugar, spices, tea, beans, peanut, seeds, screws...